What to do when Toilet Overflows – Step by Step Guide to Deal With It
Is your toilet fine and dandy? One day you flush and find it overflowing! A clogged toilet is one of the grossest and most disgusting sights ever. Nonetheless, this debacle occurs more often than not. The toilet overflowing is as rattling as it is common. Once in a while, you might have experienced this dread, or heaven forbid, you may face it in the future. It is one of the most embarrassing moments if you are a guest somewhere. However, the host is even more so, trust me on that! If you ever experience a clogged toilet, then instead of standing there muddled and nauseous, when the water level is rising on flushing, you ought to do something about the dump about to come out. Don’t know what to do when the toilet overflows? Well, you will if you keep on reading.
Toilet overflowing and clogging go hand in hand. If you flush the clogged toilet, the water (and the disgusting drop) level upsurges instead of going down, then you get the overflowing toilet. The situation is problematic in several ways. A clogged toilet is both unsanitary and frustrating. The toilet germs can cause several diseases, so you must avoid contact with the toilet water all costs! The bacteria and viruses there can cause urinary tract infections, along with other conditions such as hepatitis. Even if there has been any contact, do not fret over it. Wash it off.
While the event is horrifying, you must not panic! Be calm instead. First, understand why does a toilet overflow and then we will guide you how to deal with the mess, one step a time. Just in time, you will be able to address this calamity with ease and fix your clogged toilet, like a professional. Let us first find out why does a toilet overflow, before telling you what to do about it.
Is the toilet overflowing for no reason?
There is a reason for everything that happens in the universe. If the toilet overflows, then there must be clogging somewhere. Be sure to figure out where the blockage is. The problem could lie beyond the toilet bowl which you are unable to see. It might be with the toilet trap, or there could be clogging in the drain lines. In most cases, you would have to take out the toilet and look for blockage in the plug.
If you are unwilling to do the checking on your own, then a plumber can sort it out for you. However, bear in mind that the guy will charge you a hefty fee for that. So it is best to grab a plunger and auger, time to get to work if you are to save some money!
Toilet overflowing clean up
For an overflowing toilet, you might not need a plumber. It is something that you can fix on your own. If you want to, but you ought to! Some peeps might find the task gruesome. If calling a plumber won’t perturb your budget, then go ahead and do it. Otherwise, here is what you have to do.
The first thing you have to do is to stop the water supply to the toilet and then clean the spills. By turning off the valve behind the toilet, it will not overflow till you turn it back on. For the mess, no matter how disgusting it is, you cannot let the waste stay on the floor. It will destroy the building. So grab a mop and start cleaning!
Put on a pair of rubber gloves. You would not want your hands to get dirty from cleaning.
How to fix an overflowing toilet
Method 1 – The good old plunger
The plumber’s friend, a plunger, is what you will need to get started. This handy tool has a suction cup attached to a stick. If your bathroom is devoid of one, then immediately rush to the store and buy yourself one. A plunger is imperative for a bathroom. Here is what you need to.
- If the toilet bowl has no water, then fill it. Water should be hot and enough to cover the cup of the plunger.
- Place the rubber part of the plunger entirely over the hole. Make sure that the cup covers the exit thoroughly.
- Push the rubber suction down and then pull it up. Do not take it out. Keep on the back and forth movement.
- Increase the pace and repeat at least 15 times.
- Add water if the level goes down
- Keep on plunging till you clear the clog.
Tip: Adding hot water will ease the unclogging. However, make sure that the water is not boiling as it may damage the toilet.
Method 2 – For harder clogs
Another handy tool is a plumber’s snake. Contrary to the name, it is an auger for clogged toilets. If you were unable to unclog the toilet overflows with a plunger, then you will need an auger or a plumber’s snake. The reason for the failure might be that the clog lies within the drain pipe or sewer lines. Another cause could be that the clog is too hard. The plumber’s snake is capable of reaching there and removing the blockage. Here is what you have to do.
- Grab the snake from the handle and push the corkscrew into the toilet hole.
- Rotate the handle in a clockwise direction. This will direct the snake forward into the exit.
- Keep on rotating till the corkscrew won’t go any further.
- The snake will have trapped the clog. Whatever it may be, some paper or your dump, pull the snake back to remove it. If it comes back empty, then put it in again.
- If you have been successful, then take out the plumber’s snake. Dispose of the clog or waste properly.
- Wash the snake with antibacterial soap.
- Plunge the toilet and then flush it.
Method 3 – If you have no tools at home
If you have neither the auger nor the plunger, then you can try your luck with just soap and water. Here is how you can pull it off.
- Carefully take off the lid of the toilet tank. You would not want to break it by dropping.
- Pour 50 ml of liquid soap into the tank. Even a shampoo will do the trick if liquid soap is unavailable.
- Fill the tank with hot water. Either you can get it from the hot side of the tap, or you can heat it on a stove or microwave oven.
Note: While the water should be hot, it must not be boiling. Make sure that bubbles do not appear while heating. Boiling water will significantly damage it and the toilet starts overflows.
- Wait for at least 30 minutes. This time should be enough for the soap and water to do their job. Observe the water level in the bowl. If it is decreasing, then the trick is working!
- If there is a need to add more soap and water, then do it. However, be sure that it will not flood the bowl.
- If you are confident that there will be no overflow, then flush the toilet. This would push the clog away if soap had loosened it.
Note: If there is a risk of overflowing, then do not flush. It will flood the bowl.
The best way to deal with a clog is to get rid of it using a plunger or a plumber’s snake.
What to do if the toilet is overflowing from the tank
While clogged toilets are a mess, a toilet tank overflows is a much more pressing concern. This situation will end up flooding the whole restroom! Usually, the problem lies with the overflow tube or the fill valve.
The fill valve controls the filling of the tank. The extra water goes to the overflow tube instead of the floor. Problems arise when the fill valve does not shut off, or if the overflow tube is too long. The float might also need adjustment if the tank is overflowing.
How to fix an overflowing toilet tank
If the toilet tank tends to flood the bathroom, then you need to take off the lid. Here is what you can do to alleviate the problem.
- If the overflow tube is too long, then you ought to cut It to appropriate length using a hacksaw.
- You might need to adjust the float. Set it right to lower the water level. Use the rod to alter the float level.
- Check the valve as well. The valve has an adjustment screw on top. Using a screwdriver, if you rotate it in a clockwise direction to decrease the shutting time of the valve. Immaculate the toilet vessel properly, is also necessary after doing all precautions.
If the problem persists, then to make it not any worse, you should immediately call a plumber to handle the situation.
What to do if the toilet won’t stop overflowing
If you have tried everything that we have mentioned, and the toilet still overflows, then you have to pick up the phone and contact a plumber ASAP. However, if you would like to give it one last shot and keep the money in your bank account, then here is what you have to do.
- First, turn off the water supply to the toilet.
- Take off the toilet tank lid.
- Look for the rubber ball or a vertical column, depending on the model, which is the floater. The floater controls the level of water. It might be damaged. If it is, then replace it with a new one.
- If the floater is intact, then lower the level of the floater. This will decrease the water level in the bowl. Keep descending the floater till the water reduces to the right amount.
What is the cause of the toilet bowl overflow
The main reason for a toilet to overflow is that the water does not drain down. It is due to some blockage in the plumbing. Flushing makes the matter even worse. Extra water adds to the bowl, with no drainage. Hence, the level increases and the toilet overflows. This situation calls for immediate action. Water left on the floor will seep through the surface and damage the house structure. A question arises, “What is the cause of water blockage?”
1. Toilet Bowl gets clogged
If there is a reflux of toilet water, then it is most likely due to the blockage of the bowl. The bowl can flush the waste and toilet paper only. If you dump and flush things other than that, then it may clog the toilet. Never dispose of diapers, paper products, or even flushable wipes as they are not so. It could also happen because of the size of the toilet bowl which should be calculated properly before fitting it.
2. Toilet trap gets clogged
The reason the toilet does not smell that awful (it could have been way worse) is that of the trap. It is a bending pipe which keeps the toxic and pungent gases away from the bathroom. It is possible that dump might accumulate in the trap as it is not straight but twisted. If that happens, then the result is an overflowing toilet.
3. Drain pipes get clogged
Drain pipes carry the flushed waste to the sewers. These pipes do not go all the way straight. With several turns, there is a possibility that these might trap the waste. What you would get is a clogged toilet.
Another observation concerns high-efficiency or low-flow toilets. These toilets are economical for the use of water. In some cases, the water is inadequate to flush the waste all the way down. This also results in clogging or overflowing of the toilet. If you have one in your bathroom, then be sure to flush the toilet enough to get rid of the waste completely.
What to do if the toilet randomly overflows
When toilet overflows it is not typically random. It is due to some clogging in the bowl, toilet trap, or in the sewer lines. Even if you feel that the overflow is random, then try plunging the toilet. Use the snake’s plumber if the problem persists. Your last resort would be to bring a plumber in to check the drainage lines. There is a chance that the problem lies with the drainage pipes.
If you encounter a clogged toilet next time, you will know what to do. You’re welcome! However, if you are unable to fix the overflow, then there is no shame in that. Get the professionals to do it for you so that you don’t make it worse. They might charge a hefty fee, but it should be worth alleviating the dread. Never dump any cloth, diaper, or any solid other than a toilet paper into the bowl.
- 1 What to do when Toilet Overflows – Step by Step Guide to Deal With It
- 2 Is the toilet overflowing for no reason?
- 3 Toilet overflowing clean up
- 4 How to fix an overflowing toilet
- 5 What to do if the toilet is overflowing from the tank
- 6 How to fix an overflowing toilet tank
- 7 What to do if the toilet won’t stop overflowing
- 8 What is the cause of the toilet bowl overflow
- 9 What to do if the toilet randomly overflows